the resulting torque is balanced in flight. The tail rotor has no function.
This system is used
for man-carrying, as well as model helicopters, because of its complicated
structure, very rare.
maintenance and maneuverability is simpler than other systems.
Hovering is perfectly possible
in a horizontal position, the helicopter is completely stable if it is
turned right or left to the building-related efficiency markedly and is
excellent. These are the main reasons for the installation of this system.
The control pulses
are only transmitted by the pilot on the lower rotor. The upper rotor
is not connected to the servos.
stabilizer registered the movements of the trunk during the rotation and
is automatically cyclic control commands to the rotor, which counteracts
the motion of the hull. The lower rotor is not stabilized.
This system ensures
respond very quickly to signals which allows a very precise control.
cyclic system includes a swash plate with no externally mounted ball joints.
The bearing allows movement
in the horizontal direction by two servos and the cyclic control led a
movement that matches the direction and intensity of the pitch and roll
The control of the rotor axis
(rear control) requires the installation of a special motor for the upper
and lower rotor, as different speeds depending on the gas control.
The lightweight rotors
speak very well to the gas control.
features Carson Big EC-135 AIR-ZERMATT:
remote-controlled helicopters suitable for indoor and outdoor flight ,
100% ARF - everything is included in the set (the operation for only a
total of 8 x AA batteries or rechargeable batteries for the remote control
A detailed, illustrated instruction manual with spare parts list is in
of the RC Helicopter:
Product: Carson RC helicopter "Carson Big EC-135" AIR-ZERMATT""
Length: approximately 440 mm
Main rotor diameter: approximately 455 mm
Height: approximately 260 mm
Width: approximately 125 mm
Weight: approximately 400 g (without battery)
RC system: 4 Channel - digital proportional
Engine: 2 x 370 speed electric motor
Construction period: 100% Ready to fly
Flight time: up to about 15 minutes .
Power battery pack: Lithium-Polymer
7.4V 1000 mAh
Network loader: ~ 220V AC adapter charger with automatic balancer
Charging time: about 1.5 to 2 hours
Target group: Beginner, Intermediate