e-Station BC6DC - 6S Balance Charger/Discharger Tamiya Kyosho HPI Futaba Savox Bandai Traxxas Hirobo Yokomo Walkera Align Trex RC Spare Parts plastic scale model shop Supplier Dsitributor Dealer Wholesaler Retail Store Online Shop

Home - e-Staion Charger - e_station_bc6dc

e-Station BC6DC - 6S Balance Charger/Discharger [e_station_bc6dc]

US$136.37

e-Station BC6DC - 6S Balance Charger/Discharger

Item No

BC6DC

Specification
Operating voltage	DC 11~18 volts
Idling current	approx. 100mA
Charge/discharge power	max. 80 / 8W
NiCd/MH	1 to 15 cells
LiIo/LiPo/LiFe	1 to 6 S
Pb	2 to 20 V
Charge current	0.1 to 5.0A
Discharg current	0.1 to 1.0A
No. of cycle	1 to 5 times
Battery data memory	up to 5 data
Weight	340 g
Dimension	130 x 90 x 30 mm

User's setting-up parameters
Lithium battery voltage type	LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity	5 to 20mV
NiMH Delta-peak voltage sensitivity	5 to 20mV
Battery temperature cut-off	20 to 80C or OFF
Waste time between charge/discharge	1 to 60 min.
Trickle charge mode	ON/OFF, up to 200mA
Integral timer limit for safety	10 to 720 min.or OFF
Maximum charging capacity limit for safety	10 to 9990mAh or OFF
Key beep and buzzer sound	ON/OFF
Input power low alert	10 to 11V
LCD back-light brightness	1 to 100 steps

- Operating software
  Every operating program in the unit is controlled with mutual links and communications to prevent
every possible error, so it introduces the maximum safety, such as input voltage warning, reverse
polarity protection and Lithium cell-count input error warning.

- Individual voltage balancer for Lithium batteries inside
  BC6DC has an individual-cell-voltage balancer inside. So it does not need any balancer separately
when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.

- Accept various types of Lithium battery
  BC6DC can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different
characteristics by their chemistry. You can select any one of them that you are going to process
before the job.

- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of
Lithium battery and 'Storage mode controls the final voltage of the battery to be suit for long time
storage.

- Data store/load
  For users convenience it can store maximum 5 data of different batteries. You can establish the
data contains program setting of the battery to charge or discharge continually. These data can be
called out at any time you need and the process can be executed without program setting.

- Cyclic charging/discharging
  Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and
balancing at both outputs.

- PC based analysis using USB communication
  For technical expert, BC6DC offers PC based program can analysis the characteristic of the battery
via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the
individual voltage of each cell in the Lithium battery pack. This program can run on both outputs with
single USB link to PC.

- Robust outer aluminum case
  High-quality aluminum case is durable and very efficient to cool out the internal heat.

This product was restocked to our store on Monday 13 June, 2011.

Quantity: