e-Station BC8DX - High-Power 2 ch. Balance Charger/Discharger Tamiya Kyosho HPI Futaba Savox Bandai Traxxas Hirobo Yokomo Walkera Align Trex RC Spare Parts plastic scale model shop Supplier Dsitributor Dealer Wholesaler Retail Store Online Shop

Home - e-Staion Charger - e_station_BC8DX

e-Station BC8DX - High-Power 2 ch. Balance Charger/Discharger [e_station_BC8DX]

US$346.32

e-Station BC8DX - High-Power 2 ch. Balance Charger/Discharger

Item No

BC8DX

Specification
Operating input voltage	DC 11~18 V
Idling current	approx. 100mA
Charge/discharge power	OUTPUT-1: max. 200/25W OUTPUT-2: max. 200/25W
NiCd/MH	OUTPUT-1: 1 ~ 22 cells OUTPUT-2: 1 ~ 22 cells
LiIo/LiPo/LiFe	OUTPUT-1: 1 ~ 8S OUTPUT-2: 1 ~ 8S
Pb	OUTPUT-1: 2 ~ 28V OUTPUT-2: 2 ~ 28V
Charge current	0.1 to 9.0A
Discharge current	0.1 to 5.0A
No. of cycles	up to 10 times, N/A for Lixx
Battery data memories	up to 5 data per battery-type
Battery capacity range	100 ~ 65000mAh
Delta-peak sensitivity	zero, 5 ~ 20mV adjustable
Trickle charge current	off, 50 ~ 300mA adjustable
Current drain in balancer	200mA/cell
Weight	1100g
Dimension	200 x 150 x 55 mm

User's setting-up parameters
Lithium battery type	LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
Lithium battery charge mode	Normal, Balance, Storage, Fast
NiCd/NiMH charge mode	Normal, Linear, Reflex
NiCd Delta-peak voltage sensitivity	disable, delicate, 5 to 20mV adjustable
NiMH Delta-peak voltage sensitivity	disable, delicate, 5 to 20mV adjustable
Pb battery charge mode	Linear, Pulse
Battery temperature cut-off	Off, 20 to 80C
Waste time between charge/discharge cycle	zero to 60 minutes.
Trickle charge mode	Off, 50 ~ 300mA adjustable
Integral timer limit for safety	Off, 10 to 1380 minutes
Maximum charging capacity limit for safety	50 ~ 120%
Key beep and buzzer sound	ON/OFF, melody selectable
Input power low alert	10 to 11V
LCD back-light brightness	Off, 1 ~ 8

- Operating software
   The operating program in this charger is executed with mutual links and communications with every
components to prevent any possible error, so it introduces the maximum safety. Especially, the charging
algorithm is so multifarious that you can select the best program to suit your requirement. And BC8DX
has a large LCD for showing various informations including charge/discharge graphs during the process.

- High-power dual output circuit
  BC8DX employs the circuit that features two totally independent but identical high-power outputs which
are powered as much as 200watts each. As a result, it can charge or discharge up to 44 cells of NiCd/
NiMH or 16 series of Lithium batteries simultaneously. Furthermore, the twin-fan cooling system is so
efficient that can hold such a power without any trouble of running the circuit.

- Monitor the individual voltages on discharge
  BC8DX also can monitor the individual voltages of the Lithium battery pack during the discharge process
as well as ��FAST�� and ��STORAGE�� mode. If the voltage of any one cell varies abnormally, the process will
be stopped with the error message.

- Maximum safety
   Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-
peak voltage detection. (NiCd/NiMH)
   Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper
limit of charge current to avoid from feeding high current to the battery. This is very useful when charging
the low impedance and small capacity NiMH battery in 'AUTO' mode.
   Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If
the charging capacity exceeds the limit the process will be terminated automatically when you set the
maximum value.
  Temperature limit : The temperature of the battery on charging or discharging will be raised by its internal
chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has
been reached.
   Processing time limit : You can also restrain the maximum processing time to prevent any possible
defect.

- Cyclic charging/discharging
   Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and
balancing at both outputs.

- PC based analysis using USB communication
   For technical expert, BC8DX offers PC based program can analysis the characteristic of the battery via
USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the
individual voltage of each cell in the Lithium battery pack. This program can run on both outputs with single
USB link to PC.

This product was restocked to our store on Monday 13 June, 2011.

Quantity: