|
The SVT F-150 Lightning is built on a precisely designed TL-01 chassis that incorporates shaft-driven full-time 4WD system equipped with quality differential gears in front/rear sealed gearboxes. This system is fitted on a lightweight yet durable monocoque frame. Responsive double wishbone suspension system with four friction dampers ensures a smooth ride even over rough surfaces. Requires a 7.2V battery and charger.(Not Included) Specifications - Chassis Type: TL-01
- Scale: 1/10
- Length: 18.23 inches (463mm)
- Width: 7.24 inches (184mm)
- Wheelbase: 10.12 inches (257mm)
- Front Tread: 6.18 inches (157mm)
- Rear Tread: 6.18 inches (157mm)
- Weight: 2.29 lbs. (1038g)
- Chassis: ABS Monocoque
- Suspension: 4 Wheel Independent
- Damper Type: Plastic coil over friction
- Drive Train: 4WD shaft drive
- Gear Ratio: 7:96:1
- Differential Gear System F/R: 3-Bevel Diff
- Transmission type: Shaft drive mid-ship full-time 4WD
- Differential Type: Bevel Gear
- Engine: Electric 540
- Speed Controller: 3 Step F&R Mechanical
- Wheels & Tires: Chrome 5 spoke/radial
- Tire Diameter F/R: both 64mm
- Tire Width F/R: both 27mm
- Body Type: Polycarbonate Cut & Printed
- Radio: 2-Channel Pistol (included)
- Power Source: 7.2V battery (not included)
Spare Parts & Hop Ups - 53467 TL-01 & FF02 Long suspension arm set
- 53440 On-road tuned hard spring set
- 53418 TL-01 Universal shaft (2pc.)
- 53347 3x3mm spring set screws (10pc.)
- 53346 TL-01/M03 quick release battery holder
- 53345 TL-01/M03 toe-in rear upright
- 53342 TL-01 speed-tuned gear set
- 53333 Touring car tuned spring set (short)
- 53324 TL-01 stabilizer set
- 53323 TL-01 carbon propeller shaft
- 53322 TL-01 hollow carbon gear shaft
- 53303 TL-01 adjustable upper arm set
- 53301 TL-01 stainless steel suspension shaft set
- 53300 TL-01 turnbuckle tie-rod set
- 53295 Tire inner foam
- 53292 TL-01 ball bearing set
- 53280 TA03 super low friction damper set (4pc.)
- 53267 TA03 ball differential
- 53163 On-road tuned spring set
- 53162 4mm anodized aluminum flanged lock nuts (black)
- 53161 4mm anodized aluminum flanged lock nuts (gold)
- 53160 4mm anodized aluminum flanged lock nuts (red)
- 53159 4mm anodized aluminum flanged lock nuts (blue)
- 53144 Touring & rally car bushing & ball connector set
- 53141 4WD touring & rally car lightweight king pins
- 53095 3x10mm titanium tapping screw (10pc.)
- 53056 Pin type wheel adapter
- 50357 22T, 23T AV pinion gear set (only the 23T gear in this set is compatible with the TL-01)
- 50356 20T, 21T AV pinion gear set (only the 21T gear is compatible with the TL-01)
 |
