|
The Subaru Impreza WRC 2001 is built on a precisely designed TL-01 chassis that incorporates shaft-driven full-time 4WD system equipped with quality differential gears in front/rear sealed gearboxes. This system is fitted on a lightweight yet durable monocoque frame. Responsive double wishbone suspension system with four friction dampers ensures a smooth ride even over rough surfaces. Specifications - Chassis Type: TL-01
- Scale: 1/10
- Length: 17.36 inches (441mm)
- Width: 7.28 inches (185mm)
- Wheelbase: 10.12 inches (257mm)
- Front Tread: 6.18 inches (157mm)
- Rear Tread: 6.18 inches (157mm)
- Weight: 2.29 lbs. (1038g)
- Chassis: ABS Monocoque
- Suspension: 4 Wheel Independent
- Damper Type: Plastic coil over friction
- Drive Train: 4WD shaft drive
- Gear Ratio: 7:96:1
- Differential Gear System F/R: 3-Bevel Diff
- Differential Type: Bevel Gear
- Engine: Electric 540
- Transmission Type: Shaft drive mid-ship full-time 4WD
- Steering Tie Rod: 2 part
- Speed Controller: 3 Step F&R Mechanical
- Wheels & Tires: Spoke/radial
- Tire Diameter F/R: both 64mm
- Tire Width F/R: both 27mm
- Body Type: Polycarbonate Cut & Printed
-
- Radio: 2-Channel Pistol (included)
- Power Source: 7.2V battery (not included)
Spare Parts & Hop Up Options 53467 TL-01 & FF02 Long suspension arm set 53440 On-road tuned hard spring set 53418 TL-01 Universal shaft (2pc.) 53347 3x3mm spring set screws (10pc.) 53346 TL-01/M03 quick release battery holder 53345 TL-01/M03 toe-in rear upright 53342 TL-01 speed-tuned gear set 53333 Touring car tuned spring set (short) 53324 TL-01 stabilizer set 53323 TL-01 carbon propeller shaft 53322 TL-01 hollow carbon gear shaft 53303 TL-01 adjustable upper arm set 53301 TL-01 stainless steel suspension shaft set 53300 TL-01 turnbuckle tie-rod set 53295 Tire inner foam 53292 TL-01 ball bearing set 53280 TA03 super low friction damper set (4pc.) 53267 TA03 ball differential 53163 On-road tuned spring set 53162 4mm anodized aluminum flanged lock nuts (black) 53161 4mm anodized aluminum flanged lock nuts (gold) 53160 4mm anodized aluminum flanged lock nuts (red) 53159 4mm anodized aluminum flanged lock nuts (blue) 53144 Touring & rally car bushing & ball connector set 53141 4WD touring & rally car lightweight king pins 53095 3x10mm titanium tapping screw (10pc.) 53056 Pin type wheel adapter 50357 22T, 23T AV pinion gear set (only the 23T gear in this set is compatible with the TL-01) 50356 20T, 21T AV pinion gear set (only the 21T gear is compatible with the TL-01)  |
